Click Here To View Shopping CartClick here to check your order statusClick Here To Login
Spacer
Spacer
Seagate support Spacer Spacer Spacer
Spacer
Spacer Order Online or Call us Toll Free   866-419-6615
Spacer Spacer
spacer
spacer ST3096A Configuration and Specifications spacer
spacer
 

Legacy

Capacity:
Speed:
Average Seek Time:
 Cylinders:
Heads:
Sectors:

89.2 MB
3200 rpm
14 ms
1024
10
17


Installation Guide | Product Manual

 

Odd characters? Click here for help. A version of this specification with the linedraw characters approximated by text is available by clicking here.

                         SEAGATE TECHNOLOGY, INC.
                              1-800-SEAGATE
                          http://www.seagate.com
                            (C)opyright 1991



ST-3096A

                                                   4-pin DC
                   3-pin DC                        Power
                   Power    ͸/4321\
                 G125ѵ::::::::::::::::::1Ƴ 0 0 0 0 
                   0 0 0 ;5GG12
                  321;   (pin-20 missing
                               for keying purposes)

                User Configuration Block
               (located behind 3-pin DC)
              
                                                        1= On, 0= Off
(back of drive)    2 o-o 1   Life Test (do not use)
                   4 o-o 3   Master on (Slave off) 1  1  0
                   6 o-o 5   Slave Present  0  1  0
                   8 o-o 7   Reserved
(front of drive)  10 o-o 9   Active LED               S  M  S
                                                         i  a  l
                                                         n  s  a
                                                         g  t  v
                                                         l  e  e
                                                         e  r

                            ST-3096A


       UNFORMATTED CAPACITY (MB) ________________N/A
       FORMATTED CAPACITY (xx/17 SECTORS) (MB) __89.2
       ACTUATOR TYPE ____________________________STRAIGHT ARM
       TRACKS ___________________________________
       CYLINDERS __PHYSICAL/LOGICAL______________xx/1024
       HEADS ______PHYSICAL/LOGICAL______________3/10
       DISCS (3.5 in) ___________________________2
       MEDIA TYPE _______________________________THIN FILM
       RECORDING METHOD _________________________RLL (2,7)
       TRANSFER RATE INTERNAL (mbits/sec) _______up to 15
       SPINDLE SPEED (RPM) ______________________3,211
       AVERAGE LATENCY (mSEC) ___________________9.34
       BUFFER ___________________________________32 KByte SeaCache
       INTERFACE ________________________________AT BUS
       SECTORS PER DRIVE ________________________174,080
       TPI (TRACKS PER INCH) ____________________1,792
       BPI (BITS PER INCH) ______________________31,005
       AVERAGE ACCESS (ms) ______________________14
       SINGLE TRACK SEEK (ms) ___________________3
       MAX FULL SEEK (ms) _______________________22
       MTBF (power-on hours) ____________________150,000
       POWER REQUIREMENTS: +12V START-UP (amps) _0.9
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________5.3
                           IDLE _________________2.1
                           STANDBY ______________0.7
                           SLEEP ________________0.7
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________*

       Physical:
                        Height (inches/mm):     1.00/25.4
                        Width  (inches/mm):     4.02/102.1
                        Depth  (inches/mm):     5.77/146.6
                        Weight   (lbs/kg):      1.3/0.59

 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

Possible translation:  1024 cyl, 10 heads, 17 sectors = 89,128,960
Possible translation:   836 cyl,  8 heads, 26 sectors = 89,030,656

Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
ZBR = Zone Bit Recording = Variable sectors per track

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (5/13/91)

A copy of this specification file may be obtained by FTP at
ftp://ftp.seagate.com/techsuppt/at/st3096a.txt.


 



spacer